| Product Model | GG2380 |
| Dimensions | 2380*720*1088 |
| Grinding groove size | 2200*520mm(square barrel) |
| Power supply | AC380v(50Hz)16A |
| Motor power | 5.5kw*2 |
| Equipment weight | 660KG |
| Grinding capacity | 50-70Kg |
| Operation mode | Positive and negative rotation |
| Steel needle | 14kg |
| Lapping liquid | 100L |
| Motor speed | 1400 RPM |
| Diameter | 0.2-2.00mm |
Translational magnetic grinder maintenance troubleshooting method:
1: The polishing barrel of the translational magnetic grinder has water leakage. The magnetic polishing needle at the bottom of the grinding barrel can be removed with pliers and added with glue
2: the timer of the translational magnetic grinder does not flash, does not press the start switch, and can be timed by pressing it.
3: When the water in the polishing barrel of the translational magnetic grinder overheats, please change the water in time (the normal water temperature range is controlled within 50°C).
4: the translational magnetic grinder has large vibration, check whether each Angle of the machine is in the force position, and adjust the height and length of the foma wheel.
5: the instructions are normal, but the machine does not work, check whether the voltage is lower than 38V; Magnetic polishing machine needle placement is excessive.
